CO₂ Incubator Labo C201

REF 15245

Incubator with 200 liter chamber capacity

Advantages of Labo C201:

7“ colour touch screen
UV decontamination (option)
Particle filter (P3) within airflow
Graphical display of recorded parameters of the past 2 h or 24 h (T, CO₂, rH, O₂)
Cable bushing (Access port)
Access control via numerical code (option)
RS485 or ethernet interface
Active sterile humidity:

External water reservoir

Distilled water is vaporized at 120 °C

Minimized risk of contamination

Humidity sensor (rH)

Very fast recovery

Dual beam infrared sensor

Very precise measurement

Very fast recovery

Long-term stable

Independent six-sided direct heating

Homogeneous temperature distribution in incubation chamber

Very fast recovery

UV decontamination

O₂ control

Subdivided inner glass door with 6 small doors

Access control via numerical code

PC software LaboDat+

Interior	Electro-polished stainless steel with coved corners Shelves and ductwork easily removable for cleaning purpose Access port Ø 30 mm
Temperature	Intelligent temperature control system avoids condensation in inner chamber
Humidity supply	Active sterile humidity via external water supply container
CO₂ control	Dual beam infrared sensor Measurement independent from temperature and humidity
Fast recovery	For all adjustable parameters through optimized microprocessor control
Easy handling	Menu guided 7“ colour touch display Graphical display of recorded parameters of the past 2 h or 24 h
Diagnostic system	Visual and acoustic alarm if set point deviation or sensor defect occurs Door monitoring Remote alarm
Options	O₂ control: connection for N₂ Subdivided inner glass door with 6 small doors Access control via numerical code UV decontamination routine PC software LaboDat+
Interfaces	Alarm contact (potential free) RS485 or Ethernet interface

Exterior	Dimensions 720 x 700 x 870 mm (w x d x h)
Interior	Chamber volume 200 l Electro-polished stainless steel Shelves height adjustable
Temperature	Panel heated interior chamber and door Range 27-42 °C starting 5 °C above ambient temperature Stability / uniformity ±0.1 °C / ±0.3 °C Over-temperature alarm 32-47 °C
CO₂ control	Dual beam infrared sensor Range 0–10 % CO₂ Stability ±0.1 % CO₂
O₂ control < 21 % (optional)	Measurement with galvanic sensor Connection of N₂ Range 1-21 % O₂
Humidity	Active sterile humidity generated by vaporization module at 120 °C Measuring range 0–98 % rH / adjustment range 60 % – 95 % rH
Access port	Ø 30 mm
Supply	230 V AC, 50/60 Hz or 115 V AC, 50/60 Hz, 250 VA Inlet pressure for gas 0.8 bar Ambient temperature 18-30 °C
Classification	Safety class I Conform to EN 61010

	Subdivided inner glass door - for even faster recovery 6 small inner doors Even faster recovery of all parameters Even lower gas consumption Easy cleaning of inner doors Scope of supply: 6 split shelves 474 x 222 mm (d x w) each 3 shelves 485 x 454 mm (d x w) each
	UV decontamination Individual start by user Duration: 180 minutes Short-wave UV radiation (UV-C radiation, <280 nm) UV mode is terminated immediately when the door is openened
	Access control - higher security for your cultures Access control via touch screen Mechanical unlocking in case of power failure (emergency release)
	Stacking kit - for safe positioning Safe, easy and space-saving positioning of the devices in the laboratory REF 10649 Underframe, 15 cm height, white coated steel REF 10681 High frame stand, 115 cm height, white coated steel
	Roller base For mobile positioning of the devices in the laboratory, on lockable wheels, preventing roller base movement REF 14411 Roller base, 15 cm height, on lockable wheels
Our Labo C201 incubators are available with O₂-control (O₂ < 21 %)
Each Labotect CO₂ incubator passes an individual cell-growth test prior to delivery!
Further accessories of the incubator Labo C201	Incubator-Filter-Box Gas In-Line-Filter Accessories for active sterile humidity supply PC software LaboDat+

back